The Gas point comes complete with a Plug in tail connector for connecting onto the hose from the appliance. Inserting the tail connector and turning, locks it in place and allows the gas to flow.
The Gas Point comes complete with fitting instructions. It should be installed by a competent Gas Safe (was CORGI) registered installer.
It is also supplied with 4 fixing screws.
You will need a 60mm cutter to create orifice.
The metal pipe for the gas inlet needs to be 8mm.
The hose for the Plug in tail connector needs to be 8mm bore LPG hose - our number HA132. You will also need suitable hose clips our number HA819.