The Morco D61B LPG Caravan and Marine Gas Water Heater has Automatic ignition and flame failure on all burners. Two burner control accommodates a wide variation of ambient water temperatures and can heat 6 litres of water in a minute. Safety features include a water spillage device and easy drain down.It gives a flowrate of 6 litres per minute at a temperature rise of 25 degrees celsius above ambient. Maximum power input is 11KW. It requires a minimum water operating pressure of 1Bar and must be connected to a conventional flue.
Morco D61B water heater flue kit. Can also be used with the following water heaters - Rinnai,Morco D51 & D61, all Paloma, Vaillant MAG, Saunier Duval SD14 & Chaffoteaux gas water heaters to correct British standards. Includes appliance connector, storm collar, flue pipe and gas vent terminal.
Morco D61B/E water inlet, outlet and gas inlet fitting kit, which makes it easier to connect the mains water and gas supplies. For use with Morco D61E and Morco D61B water heaters. NOT required if you are replacing a Morco D51B, Morco D61E or Morco D61B.
Morco ISV 15mm D61B/E Fitting Kit. When fitting a water heater BS5482 pt 2 and EN 1949 should be complied with. This stipulates that a gas isolation valve should be fitted on the gas supply pipe. This kit fulfils this requirement.