EX- DISPLAY MODEL
The Kane 255 Combustion Flue Gas Analyser Kit measures carbon dioxide (CO2), carbon monoxide (CO) and flue temperature. It also calculates oxygen (O2), CO/CO2, ratio, losses, combustion efficiency (Nett, Gross or Condensing) and excess air.A useful feature for when a CO Alarm is triggered, is that the Kane 255 Combustion Analyser’s CO sensor checks CO levels in ambient air. Reading in ppm or mg/m3, the CO reading can be referenced to the oxygen.The Kane 255 is supplied with a flue probe with integral temperature sensor and also has a protective rubber cover with integral magnet for "hands-free" operation.The large display shows two readings at a time. An optional infrared printer is also available for which all data can be printed on. The printed data can be 'live' data, 'frozen data' or stored data. Twenty sets of tests can be stored. Two lines of sixteen characters can be added to the header of printouts.The Kane 255 Combustion Analyser is controlled using just four buttons and a rotary dial.
12 piece dry diamond core drill set incorporates 5 of the most commonly used plumbing and general waste building size, ideal for hand basin waste overflow shower and bath waste pipe, tumble dryer vents and boiler flues.
EX- DISPLAY MODEL
Designed for surveying buildings, HVAC, electrical item maintenance and production lines, the Testo 875-1 incorporates two thermal imagers into one.
All objects above zero degrees Fahrenheit (about 273°C) emit infrared radiation that cannot be seen by the human eye. The Testo 875-1 Infrared Camera converts this radiation into electrical signals which are used to create a thermal image on screen.
Old methods of detecting electrical faults or weaknesses in buildings/industrial areas involve taking things to pieces or a lot of time consuming searching. A Testo 875 Thermal Imager allows you to non-intrusively check production lines, pipelines, energy loss and a lot more with minimal downtime and cost to you or your customer.
Many people use the Testo 875 Thermal Imaging Camera for preventative maintenance. This means finding problems before they turn into large costs or problems e.g. poor insulation or superheating electrical items.
An 80 mK thermal sensitivity allows the Testo 875-1 Thermal Imager to find even the smallest change in temperature. Additional accessories include sun shied, tripods and much more.
The Testo 312-2 Precision Manometer is a fine pressure measuring instrument to check flue gas draught, differential pressure in the combustion chamber compared with ambient pressure or gas flow pressure with high resolution. Fine pressures with a resolution of 0.01 hPa can be measured in the range from 0 to 40 hPa.
DVGW approval according to TRGI for pressure settingsand pressure tests on a gas boiler.
Gas Safe Flues in Voids Checklist (FIV Checklist pad), with 50 x 3 parts per set.
All of our Licensed Gas Safe Premium Pads are designed to be landscape for to help the Engineer complete while on site.
They all have double covers with writing guard, with triple stitching and binding tape on the spine. Then each part of the record is numbered and perforated down the left hand side, so that when each part is removed, the spine still remains intact.
This pad has been designed specifically for carrying out a safety check/inspection of chimney systems in voids and your findings in accordance with the guidance given in Gas Safe Register TB008 (Edition 3). A copy for your customer and one for you the gas engineer/business.
This Anton Flue Gas Analyser Accessory Kit ASP1 comprises of 5 x printer rolls for the Anton Infra-Red printer, 5 x Sprint Filters and an In-Car Charger for the Anton Sprint range of flue gas analysers.